Správa pozic / Positions manager

on-line nápověda k MSDB
Marek
Administrátor fóra
Příspěvky: 43
Registrován: 10 lis 2018 19:56

Správa pozic / Positions manager

Příspěvek od Marek » 26 úno 2021 20:16

[EN]
The position management function can be activated in the "Settings -> Program options" menu. When the function is activated, it is indicated by a small rectangle "* PM" as shown below.

[CZ]
Funkci správy pozic je možno aktivovat v menu "Settings -> Program options". Pokud je funkce aktivována, je indikována malým obdelníkem "* PM" jako na obrázku dole.


BREAK-EVEN FUNCTIONS

[EN]
Automatic transfer of SL to purchase price (BE)
- the "group be" option affects the divided position, when the first part of the position reaches TP, the next part (or more parts) is shifted to BE
- the next option moves any position to BE if the profit is reached by more than the specified number of points

[CZ]
Automatické přesunutí SL na nákupní cenu (BE)
- volba "group be" má vliv na dělenou pozici, kdy první část pozice dosáhne TP, další část (nebo více částí) se posune na BE
- další volba posune na BE jakoukoliv pozici, pokud je dosaženo profitu o více než uvedený počet bodů

WEEK END FUNCTIONS

[EN]
Cancellation of pending orders - specify the number of minutes before the end of the week, when we are waiting for the order to remove from the market.

Closure of open positions - specify the number of minutes before the end of the week, when we close open positions.

Further OPTIONAL setting "market distance" - the above rules will be applied to orders with a distance from the market price of less than the specified number of points.

The end of the week is detected from the platform for each instrument. This is the time to close the receipt of orders. This time is usually a few minutes before the market is closed.

ATTENTION: The set values are checked continuously. In the case of settings, the specified value and less apply. For example, if you set a closure to 120 minutes and try to execute a new order, for example, 60 minutes before the market closes, the new order will close again shortly after opening.

[CZ]
Zrušení čekajících objednávek - uveďte počet minut před koncem týdne, kdy máme čekající objednávky odebrat z trhu.

Uzavření otevřených pozic - uveďte počet minut před koncem týdne, kdy máme uzavřít otevřené pozice.

Dále VOLITELNĚ nastavení "vzdálenost trhu" - výše uvedená pravidla budou aplikována na objednávky z odstupem od tržní ceny méně než uvedený počet bodů.

Konec týdne se detekuje z platformy pro každý instrument. Jedná se o čas uzavření příjmu objednávek. Tento čas je zpravidla o několik minut dříve než je trh uzavřen.

POZOR: Nastavené hodnoty jsou kontrolovány průběžně. V případě nastavení platí uvedená hodnota a méně. Pokud například nastavíte uzavření na 120 minut a pokusíte se realizovat novou objednávku třeba 60 minut před uzavřením trhu, nová objednávka se krátce po otevření opět uzavře.


CALENDAR FUNCTIONS

[EN]
Cancel pending orders - enter the number of minutes before the calendar event.

Closing open positions - enter the number of minutes before the calendar event.

Further OPTIONAL setting "market distance" - the above rules will be applied to orders with a distance from the market price of less than the specified number of points.

The function works with the "Mini calendar". This calendar should be turned on when you can keep track of upcoming events with a VERY IMPORTANT priority. The default setting of the mini calendar for tracking events is MEDIUM and VERY IMPORTANT, however, automatic termination of positions responds only to events VERY IMPORTANT !!!
The mini calendar shows events about 12 hours in advance and recently elapsed events (-4 hours). Remote events are not displayed.
"Mini calendar" can be turned on in "Settings -> Program options".

ATTENTION: The set values ​​are checked continuously. In the case of settings, the specified value and less apply. For example, if you set closing to 120 minutes before a calendar event and try to place a new order, for example, 60 minutes before the event, the new order will close again shortly after opening.

[CZ]
Zrušení čekajících objednávek - uveďte počet minut před událostí kalendáře.

Uzavření otevřených pozic - uveďte počet minut před událostí kalendáře.

Dále VOLITELNĚ nastavení "vzdálenost trhu" - výše uvedená pravidla budou aplikována na objednávky z odstupem od tržní ceny méně než uvedený počet bodů.

Funkce spolupracuje s "Mini kalendářem". Tento kalendář by měl být zapnutý, kdy můžete sledovat blížící se události s prioritou VELMI DŮLEŽITÉ. Výchozí nastavení mini kalendáře pro sledování událostí je STŘEDNÍ a VELMI DŮLEŽITÉ, nicméně automatické ukončování pozic reaguje pouze na události VELMI DŮLEŽITÉ!!!
Mini kalendář zobrazuje události s předstihem cca 12 hodin a nedávno uplynulé události (-4 hod.). Vzdálenější události nejsou zobrazeny.
"Mini kalendář" je možné zapnout v "Settings -> Program options".

POZOR: Nastavené hodnoty jsou kontrolovány průběžně. V případě nastavení platí uvedená hodnota a méně. Pokud například nastavíte uzavření na 120 minut před událostí kalendáře a pokusíte se realizovat novou objednávku třeba 60 minut před událostí, nová objednávka se krátce po otevření opět uzavře.
Přílohy
POSMAN1.png
POSMAN1.png (66.98 KiB) Zobrazeno 3246 x
POSMAN0.png
POSMAN0.png (68.72 KiB) Zobrazeno 3246 x